Air Flow Brass Safety Valve with pull ring for air compressor tanks and air receivers, available in 3/8 inch and 1/4 inch male thread.
Air Flow Brass Safety Valve, pull ring ke saath - air compressor tank aur air receiver ke liye. 3/8 inch aur 1/4 inch male thread mein.
इस उत्पाद की ऑनलाइन कीमत अभी प्रकाशित नहीं है। कोटेशन और मौजूदा उपलब्धता के लिए हमसे पूछें।
डीलर और वितरक कीमतें पूछने पर बताई जाती हैं।
थोक पूछताछThe Air Flow Brass Safety Valve is a pressure relief valve for compressor tanks and workshop air receivers. The complete body is machined brass, with a male threaded inlet at the bottom that screws directly into the tank boss or an air line tee. A steel pull ring on top lets the operator lift the valve by hand to check that it is free and to blow off the tank at the end of the day. Side relief ports in the body let the air discharge clear of the operator. Supplied in 3/8 inch and 1/4 inch. Hex flats above and below the body make it straightforward to fit and to remove at service time.
| आइटम कोड | |
| 3/8" / 1/4" | AF-052A |
|---|---|
| Connections | |
| Inlet | Male threaded |
|---|---|
| General | |
| Item code | AF-052A |
| Product | Brass Safety Valve |
| Operation | Pull ring, manual lift |
| Materials | |
| Body | Brass |
| Pull ring | Steel |
| Sizes | |
| Available sizes | 3/8 inch, 1/4 inch |
Air Flow MS Wheel Valve with a black hand wheel and a barbed hose outlet, in 1/2, 3/8 and 1/4 inch - for controlling air on a workshop or tyre bay line.
Quarter-turn ball valve with a flat lever handle, 1/2 inch male thread one side and a barbed hose tail the other, marked DN15 - for shutting off air or water at the tool, the bench or the drop leg.
Air Flow range of pneumatic push-in fittings with PU hose in rolls and recoil coils, for building and extending workshop air lines.
Air Flow 5 layer high pressure air hose in 8.5 mm and 10 mm, printed WP 60 kgf/cm2 and BP 180 kgf/cm2, supplied in a coil with end connectors fitted - for compressor lines, air tools and tyre bay use.
