Air Flow 5 layer high pressure air hose in 8.5 mm and 10 mm, printed WP 60 kgf/cm2 and BP 180 kgf/cm2, supplied in a coil with end connectors fitted - for compressor lines, air tools and tyre bay use.
Air Flow 5 layer high pressure air hose, 8.5 mm aur 10 mm mein - WP 60 kgf/cm2 aur BP 180 kgf/cm2 printed. Coil mein, end connectors lage hue. Compressor line, air tools aur tyre bay ke liye.
डीलर और वितरक कीमतें पूछने पर बताई जाती हैं।
थोक पूछताछFive layer compressed air hose, offered in 8.5 mm and 10 mm and supplied as a coil with the end connectors already fitted. The printed rating is WP 60 kgf/cm2 working and BP 180 kgf/cm2 burst. That is a general industrial air hose rating, comfortably above what a tyre bay asks of it, which is why the same hose serves an air tool line, a spray painting supply, a nailer or stapler feed and a workshop line extension. Bore matters on a long run. A hose too narrow for the tool costs pressure over its length, and an impact wrench that will not shift a nut is very often the line rather than the gun. Our air hose and line sizing calculator will show what a given run costs before you buy it. Made in India by Alfon Taps Limited, Hansi, Haryana.
| वज़न | 10000 ग्राम |
|---|---|
| मूल देश | IN |
| आइटम कोड | |
| 8.5 mm | AF-044 |
|---|---|
| 10 mm | AF-045 |
| General | |
| Item code | AF-044 (8.5 mm), AF-045 (10 mm) |
|---|---|
| Product | Air Pressure Pipe 5 Layer |
| Construction | 5 layer |
| In the box | |
| Contents | Hose coil with end connectors fitted both ends |
| Printed markings | |
| Working pressure | WP 60 kgf/cm2 |
| Burst pressure | BP 180 kgf/cm2 |
| Sizes | |
| Available sizes | 8.5 mm, 10 mm |
Air Flow MS Wheel Valve with a black hand wheel and a barbed hose outlet, in 1/2, 3/8 and 1/4 inch - for controlling air on a workshop or tyre bay line.
Quarter-turn ball valve with a flat lever handle, 1/2 inch male thread one side and a barbed hose tail the other, marked DN15 - for shutting off air or water at the tool, the bench or the drop leg.
Air Flow Brass Safety Valve with pull ring for air compressor tanks and air receivers, available in 3/8 inch and 1/4 inch male thread.
Air Flow range of pneumatic push-in fittings with PU hose in rolls and recoil coils, for building and extending workshop air lines.
