Air Flow MS Wheel Valve with a black hand wheel and a barbed hose outlet, in 1/2, 3/8 and 1/4 inch - for controlling air on a workshop or tyre bay line.
Air Flow MS Wheel Valve - black hand wheel aur barbed hose outlet ke saath, 1/2, 3/8 aur 1/4 inch mein. Workshop ya tyre bay line par hawa control karne ke liye.
इस उत्पाद की ऑनलाइन कीमत अभी प्रकाशित नहीं है। कोटेशन और मौजूदा उपलब्धता के लिए हमसे पूछें।
डीलर और वितरक कीमतें पूछने पर बताई जाती हैं।
थोक पूछताछThe Air Flow MS Wheel Valve is a hand wheel operated air line valve built for daily workshop duty. The body is mild steel with a male threaded inlet at the bottom and a barbed outlet on the side, so it drops straight into an existing compressor or air line run and takes a rubber or PVC air hose on the barb. The moulded black hand wheel gives a firm grip even with oily hands, and the rising stem lets the operator open and shut the air by hand without a spanner. The hex bodies on the valve and the barb give a proper spanner flat when the valve is being fitted or the hose end changed. Supplied in 1/2 inch, 3/8 inch and 1/4 inch sizes for tyre shops, puncture shops, service stations and general workshop air lines.
| आइटम कोड | |
| 1/2" / 3/8" / 1/4" | AF-052 |
|---|---|
| Connections | |
| Inlet | Male threaded |
|---|---|
| Outlet | Barbed hose outlet |
| General | |
| Item code | AF-052 |
| Product | MS Wheel Valve |
| Operation | Hand wheel |
| Materials | |
| Body | Mild steel |
| Hand wheel | Moulded plastic |
| Sizes | |
| Available sizes | 1/2 inch, 3/8 inch, 1/4 inch |
Quarter-turn ball valve with a flat lever handle, 1/2 inch male thread one side and a barbed hose tail the other, marked DN15 - for shutting off air or water at the tool, the bench or the drop leg.
Air Flow Brass Safety Valve with pull ring for air compressor tanks and air receivers, available in 3/8 inch and 1/4 inch male thread.
Air Flow range of pneumatic push-in fittings with PU hose in rolls and recoil coils, for building and extending workshop air lines.
Air Flow 5 layer high pressure air hose in 8.5 mm and 10 mm, printed WP 60 kgf/cm2 and BP 180 kgf/cm2, supplied in a coil with end connectors fitted - for compressor lines, air tools and tyre bay use.
