सामग्री पर जाएँ
Hansi में निर्मित Rs 500 से ऊपर मुफ़्त डिलीवरी केवल प्रीपेड ऑर्डर
Air Flow

फ्लैट टायर लीवर 12, 18 और 24 इंच

आइटम कोड AF-053 वर्कशॉप टूल्स

Flat steel tyre lever for prising tyres off the rim, offered in 12 inch, 18 inch and 24 inch lengths with a moulded end cap, plus a handled lever version.

Flat steel tyre lever - tyre ko rim se nikalne ke liye, 12 inch, 18 inch aur 24 inch lambai mein moulded end cap ke saath, aur handle wala lever bhi.

कीमत पूछने पर
कीमत पूछने पर

इस उत्पाद की ऑनलाइन कीमत अभी प्रकाशित नहीं है। कोटेशन और मौजूदा उपलब्धता के लिए हमसे पूछें।

  • 12 inch AF-053
  • 18 inch AF-054
  • 20 inch AF-053A
  • 24 inch AF-069
शिपिंग - Rs 500.00 या उससे अधिक के ऑर्डर पर मुफ़्त, उससे कम पर Rs 99.00।
प्रेषण - Hansi में हमारी अपनी इकाई से।
भुगतान - केवल प्रीपेड। कैश ऑन डिलीवरी उपलब्ध नहीं है।
थोक में खरीद रहे हैं?

डीलर और वितरक कीमतें पूछने पर बताई जाती हैं।

थोक पूछताछ

यह कहाँ काम आता है

The Air Flow Tyre Lever Flat is the basic prising tool of any tyre shop. The bar is flat forged steel with a tapered, spooned tip that goes in between the bead and the rim, and a straight body that gives clean leverage without chewing the rim edge. The catalogue page shows the levers in plain steel finish with a moulded plastic end cap on the grip end, supplied in both black and clear cap colours. A handled version with a red plastic grip and a spooned working end is shown alongside for lighter work. Lengths are printed as 12 inch, 18 inch and 24 inch, so a shop can keep a short lever for two wheelers and a long one for car and light truck covers. Item codes AF-053, AF-054 and AF-069 cover the range.

आइटम कोड
12 inch AF-053
18 inch AF-054
20 inch AF-053A
24 inch AF-069
General
Item codeAF-053
ProductTyre Lever Flat
TypeManual tyre prising lever
Materials
BarSteel
End cap / handleMoulded plastic
Range
Item codesAF-053, AF-054, AF-069
Sizes
Printed lengths12 inch, 18 inch, 24 inch
  • Flat steel bar with tapered spooned tip for entering the bead
  • Moulded plastic end cap on the grip end
  • Printed lengths: 12 inch, 18 inch and 24 inch
  • Handled lever with red plastic grip also shown in the range
  • Item codes AF-053, AF-054 and AF-069
  • Made in India by Alfon Taps Ltd, Hansi, Haryana

इस उत्पाद के बारे में प्रश्न

Which length do I need?
Take it from the wheel you work on. The 12 inch lever suits motorcycles and small wheels; 18 inch and 24 inch are the commercial vehicle lengths, where a short lever gives too little purchase and is how levers get bent.

संबंधित उत्पाद

इस रेंज में और →
सॉकेट सेट 46 पीस 1/4 इंच
पूछताछ पर
Socket Set 46 Piece 1/4 inch
SKU AF-040

सॉकेट सेट 46 पीस 1/4 इंच

Air Flow 46 piece 1/4 inch drive socket set with ratchet handle, extension bars, bit sockets and hex key, supplied in a red moulded case.

कीमत पूछने पर
सॉकेट सेट 53 पीस 1/4 इंच
पूछताछ पर
Socket Set 53 Piece 1/4 inch
SKU AF-040A

सॉकेट सेट 53 पीस 1/4 इंच

Air Flow 53 piece 1/4 inch drive socket set with standard and deep sockets, hex, Torx, Phillips and Pozi bit sockets, ratchet handle and extensions in a red moulded case.

कीमत पूछने पर
सॉकेट सेट 32 पीस 1/2 इंच
पूछताछ पर
Socket Set 32 Piece 1/2 inch
SKU AF-041

सॉकेट सेट 32 पीस 1/2 इंच

Air Flow 32 piece 1/2 inch drive socket set with a full run of hex sockets, ratchet handle, extension bars, sliding T-bar and universal joint in a red moulded case.

कीमत पूछने पर
सॉकेट सेट 24 पीस 1/2 इंच
पूछताछ पर
Socket Set 24 Piece 1/2 inch
SKU AF-042

सॉकेट सेट 24 पीस 1/2 इंच

Air Flow 24 piece 1/2 inch drive socket set with standard and deep sockets, ratchet handle, speed brace, extensions and universal joint in a red metal case.

कीमत पूछने पर