ट्रैक्टर और खेती के टायर रिपेयर
Repair and inflation equipment for tractor, implement and farm vehicle tyres, in both tubeless and tube construction.
इस काम में क्या होता है
Agricultural tyre work has its own character. A great deal of it is still bias ply, a great deal of it still runs tubes, the casings are large and awkward, and the repair usually has to happen where the machine stopped rather than in a bay.
The consequence is that the products this work needs are not the products a car workshop stocks. Bias ply patches in the larger numbers, tube patches, long levers and the ability to repair cold without a vulcanising machine all matter more here than anywhere else in the trade.
इस काम के लिए Air Flow उत्पाद
-
बायस प्लाई टायर रिपेयर पैच (BP पैच)BP No.3 to No.8, cold repair with no heat needed, which is what a field repair requires.
-
CT रेडियल टायर रिपेयर पैचCT No.33 to No.82 for radial casings, with bead direction arrows on the face.
-
ट्यूब पैच - साइकिल, बाइक और ट्रैक्टर के लिएFor the tubes agricultural work still runs on. Mini, Tiny Round, Mini Round, Small Round and Small Oval.
-
टायर पंक्चर इनर रिपेयर प्लग पैच (मशरूम पैच)Mushroom plug patches in 6, 9 and 12 mm stems - rubber stem with a bonded patch base, fitted from inside.
-
फ्लैट टायर लीवर 12, 18 और 24 इंच18 inch and 24 inch levers for the larger casings.
-
स्टिचर रोलर1 inch knurled steel wheel on a turned wooden handle, for rolling a patch down so no edge is left unstitched.
-
स्टील ब्रश - ट्विस्टेड नॉट वायर ब्रश व्हीलTwisted knot wire wheel for buffing the surface back to clean rubber before a patch goes on.
-
ट्यूबलेस टायर सीलेंट1 litre sealant poured into the tyre to seal punctures as they happen, for equipment working away from a bay.
-
फास्ट एयर फिलिंग नोज़ल (FAFN)Lever valve filling nozzle with a 2 inch 300 PSI dial, for the slow business of filling a large casing.
-
पैर से चलने वाला एयर पंप (फुट पंप)Chrome cylinder foot pump with its own gauge and braided hose, where there is no compressor at all.
-
वाल्व कोर (वाल्व पिन)Valve cores by the hundred.
-
वाल्व ओपनर डाईCore removers and four way valve tools.
इनका उपयोग कैसे होता है
A tube repair means getting the tyre off the rim with a lever long enough for the casing, finding the puncture, buffing the tube back to clean rubber and rolling a tube patch of the right shape down over it with a stitcher.
A casing repair is the same discipline on a larger scale. The injury is prepared, a BP patch on a bias ply casing or a CT patch on a radial is chosen to cover it with a good margin of sound rubber all round, and the patch is rolled down from the centre out.
A small tubeless injury away from the shoulder can be plugged from the inside with a mushroom plug patch, whose stem fills the hole while the bonded base seals the liner.
Inflation afterwards is slow on a large casing, which is why a lever operated filling nozzle that can be left holding the valve earns its place.
यह किनके लिए है
Village and roadside puncture shops, tractor service technicians, agricultural machinery dealers with a service bay, farm and estate workshops running their own equipment, and agricultural contractors.
Also the distributors who supply them: tractor parts dealers, agri machinery dealers and rural hardware stores.
इनमें से कैसे चुनें
Construction decides the patch series before size does. Bias ply casings take a BP patch, radial casings take a CT patch with the printed bead arrows aligned to the bead. Mixing the two is the commonest mistake in agricultural repair, because the bias ply casings that have disappeared elsewhere are still working here.
Tubes take tube patches, not casing patches. Ours are offered as Mini Patch, Tiny Round, Mini Round, Small Round and Small Oval, and the shape should follow the shape of the injury.
Mushroom plugs come in 6 mm, 9 mm and 12 mm stems. Size the stem to the prepared hole after reaming, not to the nail that made it.
पूरी रेंज देखें
ऊपर दिए गए उत्पाद कैटलॉग के इन हिस्सों से हैं - हर हिस्से में उस काम की बाकी रेंज मिलेगी।
इसके साथ उपयोगी
व्यापार के लिए खरीद रहे हैं?
We manufacture these ourselves in Hansi and supply dealers, distributors and workshops directly. Tell us the trade you are in and we will quote against the quantities you actually buy.
थोक पूछताछअन्य उपयोग
The valves, fittings, couplers and hose that take air from the compressor to the tool - in any workshop, not only a tyre bay.
Replacement gauges and valves for compressor tanks, air receivers and the line coming off them.
Wheel, tyre and repair equipment sized for commercial vehicles rather than cars.
Repair consumables and preparation tools bought by the box, for shops that repair casings all day.