कंप्रेस्ड एयर लाइन पार्ट्स

The valves, fittings, couplers and hose that take air from the compressor to the tool - in any workshop, not only a tyre bay.

इस काम में क्या होता है

Every workshop that owns a compressor owns an air line, and the line is what decides whether the tool on the end of it does its job. Air has to get from the receiver to the point of work at something close to the pressure it left at, it has to be capable of being shut off at the machine rather than at the compressor, and any tool has to be able to come off the line without the whole shop stopping.

These are general compressed air components. Nothing on this page is specific to vehicles. The same non return valve sits on a tyre shop's compressor and on a furniture workshop's, and a hex nipple has no idea what trade it is in. We make them because we have made air line parts for the tyre trade for twenty years, and the parts turned out to be the same parts.

इस काम के लिए Air Flow उत्पाद

इनका उपयोग कैसे होता है

A line starts at the compressor, where a non return valve holds the tank's air in when the pump stops. From there it runs in pipe or hose to wherever the work happens, dropping down to each machine or bench.

At each drop, a valve lets that one leg be isolated: a hand wheel valve where the flow needs to be trimmed, a quarter turn ball valve where it just needs to be on or off. Hex nipples and reducers make the size changes between one thread and the next.

At the working end, a quick release coupler lets a blow gun, an impact wrench or a spray gun be swapped in seconds. A swivel keeps the hose from winding itself up as the tool is turned. Push-in fittings and PU hose are for the light, tidy runs that feed a jig or a bench rather than a heavy tool.

यह किनके लिए है

Anyone commissioning, extending or repairing a compressed air system. In practice that means air line installers and pipe fitters, compressor service engineers, plant and factory maintenance teams, and the owner of a small workshop plumbing in a first compressor.

The trades vary far more than the parts do: fabrication and welding shops, furniture and carpentry, textiles, packaging, printing, plastics, general engineering, and the tyre and vehicle workshops the range grew up in.

इनमें से कैसे चुनें

Size everything from the port it is going into, not from the part being replaced, in case that one was already adapted.

Our non return valves are offered in 1/2 inch mild steel and 3/4 inch, and the wheel valve in 1/2, 3/8 and 1/4 inch with a barbed hose outlet. The nozzle ball valve is 1/2 inch male with a barbed tail and is marked DN15 on the body. Hex nipples and reducers cover 3/4 x 3/4, 3/4 x 1/2, 1/2 x 1/2, 1/2 x 3/8 and 1/2 x 1/4 inch, male to male. Quick couplers are the standard SH20 and PM20 pattern in 1/4 inch, so they mate with couplers already in the shop.

Bore matters more than people expect on a long run. A hose too narrow for the tool costs pressure over its length, and an impact wrench that will not shift a nut is very often the line rather than the gun. The air hose and line sizing calculator below will tell you what a given run costs you before you buy it.

पूरी रेंज देखें

ऊपर दिए गए उत्पाद कैटलॉग के इन हिस्सों से हैं - हर हिस्से में उस काम की बाकी रेंज मिलेगी।

इसके साथ उपयोगी

व्यापार के लिए खरीद रहे हैं?

We manufacture these ourselves in Hansi and supply dealers, distributors and workshops directly. Tell us the trade you are in and we will quote against the quantities you actually buy.

थोक पूछताछ

अन्य उपयोग

सभी उपयोग →

एयर कंप्रेसर गेज और वाल्व

Replacement gauges and valves for compressor tanks, air receivers and the line coming off them.

ट्रक और बस टायर सर्विस

Wheel, tyre and repair equipment sized for commercial vehicles rather than cars.

ट्रैक्टर और खेती के टायर रिपेयर

Repair and inflation equipment for tractor, implement and farm vehicle tyres, in both tubeless and tube construction.

रिट्रेडिंग और टायर रिपेयर प्लांट

Repair consumables and preparation tools bought by the box, for shops that repair casings all day.