Air Flow Quick Coupler QRC set in 1/4 inch - SH20 female coupler with hose tail and PM20 male plug, the standard pattern for workshop air lines, so tools can be swapped in seconds.
Air Flow Quick Coupler QRC set, 1/4 inch - SH20 female coupler hose tail ke saath aur PM20 male plug. Workshop air line ka standard pattern, taaki tool second mein badal sakein.
इस उत्पाद की ऑनलाइन कीमत अभी प्रकाशित नहीं है। कोटेशन और मौजूदा उपलब्धता के लिए हमसे पूछें।
डीलर और वितरक कीमतें पूछने पर बताई जाती हैं।
थोक पूछताछThe Air Flow Quick Coupler QRC is the standard 1/4 inch quick release connection used on garage and tyre shop air lines. The SH20 female coupler carries a knurled sleeve that is pulled back to release, and ends in a barbed hose tail for a rubber or PVC air hose. The PM20 male plug screws into a tool, gun or hose end and pushes straight into the coupler until it locks. Both halves are made in a matching 1/4 inch size so they can be bought as a pair or ordered separately as replacements. Item code AF-070 and AF-071 cover the two parts. Quick couplers are consumable items in a busy workshop - the sleeve and plug wear with daily connect and disconnect. Keeping spares on the shelf means an inflator, blow gun or impact wrench can be put back on the line without cutting hose.
| आइटम कोड | |
| SH20 1/4" | AF-070 |
|---|---|
| PM20 1/4" | AF-071 |
| General | |
| Item code | AF-070, AF-071 |
|---|---|
| Type | Quick release coupler (QRC) set |
| Size | 1/4 inch |
| Variants | |
| AF-070 / AF-071 | SH20 1/4 inch, PM20 1/4 inch |
Air Flow MS Wheel Valve with a black hand wheel and a barbed hose outlet, in 1/2, 3/8 and 1/4 inch - for controlling air on a workshop or tyre bay line.
Quarter-turn ball valve with a flat lever handle, 1/2 inch male thread one side and a barbed hose tail the other, marked DN15 - for shutting off air or water at the tool, the bench or the drop leg.
Air Flow Brass Safety Valve with pull ring for air compressor tanks and air receivers, available in 3/8 inch and 1/4 inch male thread.
Air Flow range of pneumatic push-in fittings with PU hose in rolls and recoil coils, for building and extending workshop air lines.
