Air Flow 1/4 inch bottom connection air pressure gauge, 2.5 inch (63 mm) dial with a brass stem, in 300 PSI and 500 PSI - for compressor tanks, air receivers, regulators and workshop air lines as well as tyre work.
Air Flow ka 1/4 inch bottom connection gauge - 2.5 inch (63 mm) dial, brass stem, 300 PSI aur 500 PSI mein. Compressor tank, air receiver, regulator aur workshop air line ke liye, tyre ke kaam ke saath saath.
Dealer and distributor pricing is quoted on enquiry.
Wholesale enquiryA bottom connection air pressure gauge with a 2.5 inch (63 mm) dial and a 1/4 inch brass stem. The stem comes out of the base of the case so the dial faces the person in front of it, which is the pattern used on air compressor tanks, air receivers, regulator bodies and air line manifolds. Offered in two ranges. The 300 PSI gauge suits a workshop compressor running at typical shop pressure; the 500 PSI gauge is there for tanks and lines that run higher. Choose the one that puts your normal working pressure in the middle of the sweep rather than hard against the top of it. It is equally at home on a tyre bay's air line, which is the trade it was first made for. The case is metal with a black finish and the connection is brass. We state the connection, dial size and range because those are what we manufacture to. We do not publish an accuracy class, and this is an air pressure gauge - it is not rated for water, oil, steam, hydraulic or chemical service. Made in India by Alfon Taps Limited, Hansi, Haryana.
| Weight | 150 g |
|---|---|
| Country of origin | IN |
| Item codes | |
| 2.5" 300/500 PSI | AF-022 |
|---|---|
| General | |
| Item code | AF-022 |
|---|---|
| Type | Air pressure gauge for tank |
| Connection | 1/4 bottom |
| Brand | Air Flow |
| In the box | |
| Quantity | 1 piece |
| Materials | |
| Connection | Brass |
| Case | Metal, black finish |
| Sizes | |
| Dial size | 2.5 inch (63 mm) |
| Ranges | 300 PSI, 500 PSI |
Air Flow bottom connection air pressure gauge with a 2 inch dial and a brass stem, in 200 PSI and 300 PSI - for tyre inflation lines, workshop air lines and compressor use.
Air Flow bottom connection air pressure gauge with a 2.5 inch (63 mm) dial and a brass stem, in 200 PSI and 300 PSI - the general workshop size, for air lines and compressor tanks as well as tyre work.
Air Flow commercial air pressure gauge with a 4 inch dial and a 3/8 inch brass bottom connection, printed in both lb/in2 and kg/cm2 - for compressor tanks, receivers and air lines that have to be read across a bay.
Air Flow TTC Dandi twin tyre connector with brass dual head, steel tube and moulded grip, for filling air in twin and single tyres. Available in 7 inch and 10 inch.
