Compressed air components: non return valves, hand wheel and ball valves, mild steel hex nipples and reducers, quick release couplers, swivels, push-in fittings with PU hose, and 5 layer air hose rated WP 60 kgf/cm2. These are general air line parts - the same valve or fitting serves a fabrication shop, a furniture workshop or a factory air line as readily as a tyre bay.
Air Flow 5 layer high pressure air hose in 8.5 mm and 10 mm, printed WP 60 kgf/cm2 and BP 180 kgf/cm2, supplied in a coil with end connectors fitted - for compressor lines, air tools and tyre bay use.
Air Flow Swivel Connection Router in 1/2 inch, brass female nut on a metal male end, so the air hose can turn freely without twisting.
Air Flow MS Non Return Valve 1/2 inch, vertical pattern in mild steel, for the discharge line between an air compressor pump and its tank. Packed in a printed Air Flow box.
Air Flow NRV 3/4 inch non return valve for air compressor discharge, with a brass cap and a threaded side port, supplied in an Air Flow retail box.
Air Flow MS Hex Nipple and Reducer in mild steel, male to male, in 3/4x3/4, 3/4x1/2, 1/2x1/2, 1/2x3/8 and 1/2x1/4 inch - the size changes an air line or pipe run needs.
Air Flow Quick Coupler QRC set in 1/4 inch - SH20 female coupler with hose tail and PM20 male plug, the standard pattern for workshop air lines, so tools can be swapped in seconds.
Air Flow range of pneumatic push-in fittings with PU hose in rolls and recoil coils, for building and extending workshop air lines.
Air Flow Brass Safety Valve with pull ring for air compressor tanks and air receivers, available in 3/8 inch and 1/4 inch male thread.
Quarter-turn ball valve with a flat lever handle, 1/2 inch male thread one side and a barbed hose tail the other, marked DN15 - for shutting off air or water at the tool, the bench or the drop leg.
Air Flow MS Wheel Valve with a black hand wheel and a barbed hose outlet, in 1/2, 3/8 and 1/4 inch - for controlling air on a workshop or tyre bay line.
